When preparing music for release, it is useful to understand how loud a track actually is, how much dynamic range it retains and how close its audio signal gets to the digital ceiling.
Two measurements are particularly important:
- Integrated LUFS: Measures the perceived loudness of the entire track.
- True Peak (dBTP): Estimates the highest level reached by the reconstructed audio waveform, including peaks between digital samples.
These measurements help when preparing music for streaming platforms, but they should not dictate how a track must sound.
This article covers the terminology, practical loudness ranges, streaming normalization, limiting, dynamic range and how to measure a finished track using APU Loudness Meter in GarageBand.
1. Understanding LUFS
What does LUFS mean?
LUFS stands for Loudness Units relative to Full Scale. It is a measurement designed to describe perceived loudness rather than simply measuring the electrical or digital level of an audio signal.
Traditional peak meters tell us how high the signal gets. LUFS measurements take human hearing into account, including the fact that different frequencies are perceived differently.
This makes LUFS useful when comparing the perceived loudness of different recordings.
You may also encounter the term LKFS. It refers to essentially the same loudness measurement, although the terminology is more commonly used in broadcast standards.
The three main LUFS measurements
There are three commonly encountered types of loudness measurement:
Momentary LUFS (M)
Measures loudness over a very short period, approximately 400 milliseconds. It is useful for observing quick changes in loudness, such as drum hits or sudden effects.
Short-Term LUFS (S)
Measures loudness over approximately three seconds. It gives a more stable indication of how loud a particular section of a song is.
Integrated LUFS (I)
Measures the overall perceived loudness of the entire track, from beginning to end. This is generally the most important LUFS measurement when preparing a finished song for distribution.
Which LUFS value should you check?
For a finished music release, start with Integrated LUFS.
Momentary and Short-Term measurements are useful for examining differences between quiet and loud sections, but they do not replace the integrated measurement.
2. Understanding True Peak (dBTP)
What is True Peak?
True Peak estimates the highest level reached by the reconstructed audio waveform, including peaks that may occur between the actual digital samples.
This distinction matters because digital audio consists of discrete samples. When a digital recording is converted back into an analogue waveform, the reconstructed signal can briefly exceed the level indicated by the individual samples.
These are known as inter-sample peaks.
True Peak measurement attempts to account for them.
True Peak vs. Sample Peak
These measurements are related, but they are not interchangeable.
Sample Peak (dBFS)
Measures the highest individual digital sample. It indicates how close the recorded samples are to the maximum representable digital level.
True Peak (dBTP)
Estimates the highest level of the reconstructed waveform, including possible peaks between samples.
For mastering intended for streaming, True Peak is generally the more useful measurement.
What does dBTP mean?
dBTP stands for decibels True Peak.
A value of 0 dBTP represents the digital full-scale ceiling. Negative values indicate how far below that ceiling the signal remains.
For example:
- -0.1 dBTP: extremely close to the ceiling.
- -1.0 dBTP: one decibel below the ceiling.
- -2.0 dBTP: two decibels below the ceiling.
- -3.0 dBTP: three decibels below the ceiling.
A lower True Peak ceiling provides more headroom and can help reduce the possibility of clipping during subsequent audio encoding.
3. Common LUFS Values and What They Mean
There is no universal LUFS value that every song must reach. Different genres, arrangements and production styles have different dynamic characteristics.
The following ranges are useful as general descriptions of mastering loudness.
General Integrated LUFS ranges
- -18 to -15 LUFS: Relatively dynamic, with more room between quieter and louder passages.
- -14 to -12 LUFS: Moderate loudness, often a reasonable balance between perceived volume and dynamics.
- -12 to -10 LUFS: Louder mastering, potentially involving more compression or limiting.
- -10 to -8 LUFS: Very loud mastering, often with reduced dynamic range.
- -8 LUFS and above: Aggressively loud mastering, where preserving transients and avoiding unwanted distortion can become more challenging.
These are descriptive ranges, not quality ratings or mandatory mastering targets.
A track at -8 LUFS is not automatically better, louder in every playback situation, or more professional than one at -14 LUFS.
A practical starting point
For many music releases, somewhere around -14 to -10 LUFS Integrated can be a useful starting range for experimentation.
The appropriate result depends on the music itself.
A dynamic instrumental composition may benefit from a quieter master. An industrial techno track with heavily distorted percussion and a dense arrangement may naturally be mastered louder.
The important thing is to avoid damaging the sound just to achieve a particular number.
4. Streaming Platforms and Loudness Normalization
What is loudness normalization?
Streaming services may adjust playback volume to make tracks with different mastering levels sound more consistent in perceived loudness.
This process is called loudness normalization.
It is important to understand that playback normalization does not necessarily change the audio file you upload.
For example, if a track is mastered louder than a platform's playback reference, the service may simply reduce its playback gain.
This means that mastering a song extremely loud does not guarantee that it will sound louder than other music when played through a normalized streaming service.
Spotify's loudness guidance
Spotify uses -14 LUFS Integrated as its normal playback reference.
Its published mastering guidance includes these recommendations:
- For masters around -14 LUFS Integrated, keep the maximum True Peak below -1 dBTP.
- For masters louder than -14 LUFS Integrated, Spotify recommends keeping the maximum True Peak below -2 dBTP to help reduce the possibility of additional distortion during lossy encoding.
These are Spotify-specific recommendations, not universal requirements imposed by every distributor or streaming platform.
Official documentation:
Spotify: Loudness normalization
Should every song be mastered to -14 LUFS?
No.
The -14 LUFS figure is a playback normalization reference, not a mandatory upload specification.
If your song sounds best at -12 LUFS, there is no reason to reduce its loudness artificially just to reach -14 LUFS.
Likewise, there is no reason to push a track to -8 LUFS simply because it is possible.
The goal is to create a master that sounds good before and after playback normalization.
5. True Peak Recommendations
A practical starting point for many digital music releases is to keep True Peak at or below -1 dBTP.
However, the appropriate ceiling depends on the loudness of the master and how it will be encoded.
For example:
- -1 dBTP or lower: A common starting point for general digital distribution.
- -2 dBTP or lower: A useful additional safety margin for louder masters, particularly when following Spotify's guidance for masters above -14 LUFS.
These values are not guarantees against every possible encoding artefact.
A lossy format can produce reconstructed peaks that differ from those measured in the original WAV file. This is one reason why leaving some headroom is useful.
Does a lower True Peak always mean better audio?
No.
A master at -3 dBTP is not automatically better than one at -1 dBTP.
True Peak is a technical measurement, not a direct measurement of sound quality. The aim is to avoid unwanted clipping and distortion while retaining the character of the music.
6. Dynamic Range, Compression and Limiting
What is dynamic range?
Dynamic range describes the difference between quieter and louder parts of an audio recording.
A track with substantial dynamic variation may have quiet passages followed by powerful, loud sections.
A heavily compressed track tends to have less variation between those sections.
Neither approach is inherently better. The appropriate dynamic range depends on the music and the intended listening experience.
Compression
A compressor reduces the level of audio signals that exceed a defined threshold.
Depending on its settings, compression can:
- Control excessive peaks.
- Make the overall sound more consistent.
- Increase perceived density.
- Reduce the difference between quieter and louder passages.
Too much compression can make a recording sound flat, lifeless or fatiguing.
Limiting
A limiter is essentially a compressor designed to prevent the signal from exceeding a specified ceiling.
It is commonly used during mastering to control peaks and increase perceived loudness.
However, excessive limiting can introduce distortion and remove important transients, particularly in material with strong drums and percussion.
Other useful measurements
Apart from LUFS and True Peak, you may encounter several other measurements:
LRA (Loudness Range)
Describes the variation in loudness over a recording. It is useful for understanding how much the loudness changes between sections.
RMS (Root Mean Square)
Measures average signal energy over time. It is an older and less perceptually weighted way of describing signal level than LUFS.
PLR (Peak-to-Loudness Ratio)
Describes the difference between peak level and average perceived loudness. It can help indicate how much headroom and transient variation a recording retains.
DR (Dynamic Range)
A term that can refer to different measurements depending on the meter or analysis method. Always check how a particular tool calculates it.
7. Measuring Loudness with APU Loudness Meter
You do not need expensive mastering software to measure the loudness of a finished track.
One practical option is APU Loudness Meter 5.6.2, which is the meter used in this workflow to analyse exported audio files.
It provides several measurement modes, allowing you to examine loudness, peaks and other useful audio characteristics.
Selecting a measurement preset
For the workflow described here, the selected preset is:
Live Monitoring - Spotify/Tidal/YouTube
This is a convenient starting point when monitoring music intended for streaming.
However, a preset should not be confused with a mandatory mastering target. Always check which measurements are displayed and understand what they represent.
Understanding the Loudness Type options
APU Loudness Meter provides several measurement types:
- Momentary: Short-term loudness changes over approximately 400 ms.
- Short-Term: Loudness over approximately three seconds.
- Integrated: Overall perceived loudness of the complete measurement.
- RMS: Average signal energy.
- Peak: Highest digital sample level.
- True Peak: Estimated maximum reconstructed waveform level.
For checking a finished master, the two important measurements are:
- Integrated: Provides the overall loudness in LUFS.
- True Peak: Provides the maximum True Peak measurement in dBTP.
You need to switch between these two measurement types to read both results.
When checking True Peak, look at the Global Peak value. This represents the highest measured peak, rather than a momentary reading.
The measurement procedure
The process is straightforward:
-
[*] Export your music from GarageBand as a WAV file.
[*] Open the exported audio file in APU Loudness Meter.
[*] Select the Live Monitoring - Spotify/Tidal/YouTube preset.
[*] Run the measurement over the complete track, from beginning to end.
[*] Select Integrated under Loudness Type and record the LUFS result.
[*] Switch to True Peak and record the Global Peak result in dBTP.
[*] Add both measurements to the filename of the exported WAV file.
For example, a measurement might produce:
-12.03 LUFS
-1.09 dBTPIt is important to measure the entire song. Analysing only a chorus or a short section will not provide the Integrated LUFS value for the complete track.
Why use both Integrated LUFS and Global Peak?
They tell you different things.
A track can have a relatively high Integrated LUFS value but still have very sharp peaks.
Another track can have a lower Integrated LUFS value while retaining considerable transient headroom.
Looking at both measurements gives you a more useful picture of the final master than relying on either number alone.
8. Other Free Loudness Measurement Tools
Youlean Loudness Meter 2 Free
Another popular option is Youlean Loudness Meter 2 Free, available for Windows and macOS.
Official website:
The free version provides useful measurements including:
- Integrated LUFS.
- Momentary LUFS.
- Short-Term LUFS.
- True Peak.
- Loudness Range (LRA).
- Peak and other loudness information.
It is available as a plugin for compatible audio software and also as a standalone application.
The standalone version is particularly convenient when you simply want to analyse an exported WAV file without opening your DAW.
Which tool should you use?
APU Loudness Meter is the tool used in the GarageBand workflow described in this article.
Youlean is a useful alternative, particularly when you want to analyse exported audio files independently of your DAW or use the same measurement tool on Windows and macOS.
There is no need to use multiple meters for every mastering session. Choose one that provides the measurements you need and learn how to interpret its results.
9. A Practical GarageBand Mastering and Measurement Workflow
You do not need expensive mastering software to produce a good digital master. GarageBand, a few suitable tools and careful listening can get you a long way.
The following workflow combines the actual GarageBand adjustments with the subsequent WAV export, APU measurements and filename management.
Step 1: Finish the mix first
Before attempting to master a track, make sure the mix itself sounds right.
Pay attention to:
- Balance between instruments.
- Low-frequency buildup.
- Excessive or unpleasant high frequencies.
- Distortion that was not intended.
- Clipping on individual tracks or the master output.
- The balance between loud and quiet elements.
Mastering should not be used to compensate for fundamental problems in the mix.
Step 2: Do not apply EQ without a reason
Equalization is useful for correcting tonal problems, but it is not a mandatory mastering step.
If the mix already sounds balanced, leaving the master EQ flat may be the best decision.
Listen for an actual problem before making changes.
For example:
- Excessive energy in the sub-bass region can make a mix sound uncontrolled or cause unnecessary peaks.
- Too much energy in the low mids can make the mix sound muddy.
- Excessive presence can make percussion and other sounds harsh.
- Too much high-frequency energy can make a track fatiguing.
These are areas to investigate, not frequencies that should automatically be boosted or reduced.
It is often better to correct a problem on the individual instrument or track responsible for it rather than trying to fix everything on the master bus.
Step 3: Use compression and limiting carefully
Compression and limiting can help control the dynamics and peaks of a mix.
However, do not assume that increasing the limiter gain will automatically improve the result.
Pay attention to:
- Loss of punch in drums and percussion.
- Distortion or unwanted harshness.
- Excessive reduction of dynamic range.
- Changes in the balance between instruments.
A limiter should serve the sound, not the other way around.
Step 4: Adjust the GarageBand Limiter
GarageBand's Limiter provides controls such as Gain and Output Level.
Gain increases the level entering the limiter, while Output Level sets the intended maximum output level.
Increasing Gain can make the track louder, but it can also cause more limiting. The result may have a higher Integrated LUFS value while losing some of its transient impact.
The Output Level setting should not be treated as a guaranteed True Peak measurement. Always verify the exported audio with a True Peak meter.
When experimenting with different settings, record the Gain and Output Level values. They will be useful when comparing the resulting exports.
Step 5: Export a WAV sample and identify the settings
Once you are happy with the current settings, export the music as a WAV file.
Use a consistent filename that identifies the song, date, time and GarageBand settings.
For example:
Road Shaker - 26/07/2026, 22.15 g+3 o-2.4.wavThe filename contains:
- Road Shaker: Song title.
- 26/07/2026: Export date.
- 22.15: Export time.
- g+3: GarageBand Limiter Gain set to +3 dB.
- o-2.4: GarageBand Limiter Output Level set to -2.4 dB.
This makes it possible to identify the exact settings used to produce a particular export.
Step 6: Measure the exported WAV file
Open the exported file in APU Loudness Meter 5.6.2.
Use the following settings:
- Preset: Live Monitoring - Spotify/Tidal/YouTube.
- Loudness Type: Integrated.
Read and record the Integrated LUFS result.
Then switch Loudness Type to:
True Peak
Read the Global Peak result in dBTP.
For example:
Integrated: -12.03 LUFS
Global Peak: -1.09 dBTPThese are the actual measurements of the exported audio file, not values inferred from GarageBand's Limiter settings.
Step 7: Append the measurements to the filename
Once both measurements have been recorded, append them to the original filename.
The final filename becomes:
Road Shaker - 26/07/2026, 22.15 g+3 o-2.4 -12.03LUFS -1.09TP.wavNow the filename contains both the GarageBand processing settings and the actual measured results.
You can identify the settings used, compare different exports and determine which version produced the desired result without having to reopen the project or repeat the measurements.
Step 8: Compare different versions
If you are experimenting with different limiter settings, repeat the export and measurement process for each version.
For example, you might have one export with Gain at 0 dB and another with Gain at +3 dB.
Their filenames will tell you which settings were used and what the resulting Integrated LUFS and True Peak measurements were.
Compare the versions at approximately the same playback volume. Otherwise, the louder version may initially seem more impressive simply because it is louder.
Listen for:
- Punch and impact.
- Bass balance.
- Clarity.
- Distortion.
- Overall musical character.
This helps distinguish an actual improvement from a simple increase in volume.
Step 9: Export and analyse the final master
Once you have selected the version you prefer, export the final WAV file and measure it again.
Always measure the final exported file, not just the signal inside your DAW.
The exported file is what will eventually be delivered to your distributor.
If you make any last-minute changes to the limiter, EQ or other processing, repeat the measurement. The measurements in the filename should always correspond to that particular export.
10. Real-World Examples: Road Shaker and Beatland by zubilitic
The following examples come from actual releases by zubilitic. Road Shaker is the track used throughout this article to demonstrate the mastering process, including the GarageBand settings, WAV export and loudness measurements.
Both tracks are available on YouTube, and you can also use the DistroKid links below each video to choose another streaming platform.
Road Shaker - zubilitic
Listen to Road Shaker on Spotify, Apple Music and other streaming platforms
Beatland - zubilitic
Listen to Beatland on Spotify, Apple Music and other streaming platforms
GarageBand settings
The GarageBand Limiter was configured as follows:
- Gain: +3 dB
- Output Level: -2.4 dB
The exported WAV file was initially named:
Road Shaker - 26/07/2026, 22.15 g+3 o-2.4.wavAPU Loudness Meter results
After analysing the complete exported file, the following measurements were recorded:
- Integrated Loudness: -12.03 LUFS
- Global Peak: -1.09 dBTP
The final filename became:
Road Shaker - 26/07/2026, 22.15 g+3 o-2.4 -12.03LUFS -1.09TP.wavThis is a real example of a track that has already been released on streaming platforms.
You can listen to Road Shaker by zubilitic on your preferred streaming service.
What can we learn from this example?
First, the GarageBand settings and the resulting measurements are two different things.
The Output Level was set to -2.4 dB, but the measured Global Peak was -1.09 dBTP.
Likewise, setting the Limiter Gain to +3 dB does not mean that the track will reach a particular LUFS value. The result depends on the complete mix and how the limiter processes it.
This is why measuring the exported WAV file is important.
The filename also acts as a simple record of the mastering experiment. It preserves the settings and the actual results in one place, making it easier to revisit or compare different versions later.
Recommended filename convention
A consistent filename convention makes it much easier to manage mastering experiments, especially when several versions of the same song are exported.
A useful structure is:
Song Title - DD/MM/YYYY, HH.MM g[Gain] o[Output] -[Integrated LUFS]LUFS -[True Peak]TP.wavFor example:
Road Shaker - 26/07/2026, 22.15 g+3 o-2.4 -12.03LUFS -1.09TP.wavSome practical recommendations:
- Keep the song title at the beginning so files are easy to identify.
- Include the date and time to distinguish different exports.
- Record the relevant GarageBand settings, especially when experimenting with the Limiter.
- Append the actual measured Integrated LUFS and True Peak values after analysis.
- Keep the original export filename until the measurement is complete.
- Never confuse a plugin setting with a measured result.
The convention is intended for keeping track of your own exports. For files that will be uploaded to a distributor, use a clean final filename containing only the song title and any required version information.
11. Common Misconceptions
Myth: Every song should be mastered to -14 LUFS.
False. This is a Spotify playback normalization reference, not a universal mastering requirement.
Myth: A louder master is always better.
False. Excessive loudness can reduce dynamics and introduce distortion. Playback normalization can also reduce the volume advantage of a louder master.
Myth: -1 dBTP is a mandatory requirement for every distributor.
False. It is a common safety recommendation, not a universal requirement. Different platforms and encoding formats may have different considerations.
Myth: A limiter set to -1 dB guarantees a maximum True Peak of -1 dBTP.
Not necessarily. The limiter's ceiling may refer to sample peaks, and reconstructed inter-sample peaks can be higher. Use a True Peak meter to verify the result.
Myth: A good master must have a particular LRA or dynamic range value.
False. These values depend on the arrangement, genre and artistic intention.
Myth: Mastering software automatically makes a song sound professional.
False. Tools can help solve problems, but they cannot automatically determine what the music should sound like.
Myth: EQ must always be applied during mastering.
False. If the mix already has the tonal balance you want, additional EQ may be unnecessary.
12. Final Thoughts
LUFS and True Peak are useful measurements when preparing music for digital distribution.
Integrated LUFS helps describe the perceived loudness of the complete track, while True Peak helps identify how close the reconstructed audio signal gets to the digital ceiling.
For a practical starting point, consider:
- Integrated LUFS: Choose a value that suits the music. Around -14 to -10 LUFS can be a reasonable range to experiment with, depending on the genre and arrangement.
- True Peak: Around -1 dBTP or lower is a common starting point. For louder masters, consider a more conservative ceiling such as -2 dBTP.
Use APU Loudness Meter to analyse exported WAV files and Youlean Loudness Meter 2 Free as an alternative when you want to work independently of your DAW.
Keep your GarageBand settings and measurement results in the filenames of your working exports. This simple habit makes it much easier to compare versions and understand how your mastering decisions affect the final audio.
But remember that these are guidelines, not rules.
The most important thing is that the finished track sounds the way you intended it to sound. Technical measurements should help you make informed decisions, not dictate your creative choices.
A good master is not the one with the biggest numbers. It is the one that preserves the character of the music while translating well across different playback systems.
- Log in to post comments
- 20 views